ML30 Gen9 fan Speed H240
Hi can anyone help me with a fan issue. When the H240 is installed the system rumps up the fan rear speed to 70%. But the front stays at 20%
System spec.
E3-1240 v5
32gb ram
4x4tb in the front cadge connected to the internal controller.
250gb SSD internal sata
500gb ssd internal sata
4x1tb SSHD connected to the H240
Quodro P600
Front fan kit installed.
Windows server 2022.
Everything update using Nov 2021 SPP.
H240 is running v7 firmware, the system starts up fine when it gets to windows the the rear fan starts to creep up to 70%
With the h240 uninstalled it stays around 11%
I've reset the bios pulled power from a cold boot. Power management is set to balanced, the h240 is set to balanced. I have tinkered around changing bits but no luck. But it has booted once with the fans around 11% and stayed there.
System spec.
E3-1240 v5
32gb ram
4x4tb in the front cadge connected to the internal controller.
250gb SSD internal sata
500gb ssd internal sata
4x1tb SSHD connected to the H240
Quodro P600
Front fan kit installed.
Windows server 2022.
Everything update using Nov 2021 SPP.
H240 is running v7 firmware, the system starts up fine when it gets to windows the the rear fan starts to creep up to 70%
With the h240 uninstalled it stays around 11%
I've reset the bios pulled power from a cold boot. Power management is set to balanced, the h240 is set to balanced. I have tinkered around changing bits but no luck. But it has booted once with the fans around 11% and stayed there.
Topic Participants
Michael Scott
Samir Meharali
Jason Naismith